Recommended Product Usage Guide
MULTI-CARE™
Multi-Care™ may be tank mixed with all other Biofeed products and most liquid fertilizers. Foaming may occur when mixed with acidic fertilizers or spray chemicals. This is temporary, the products will settle back into solution. Be sure to water after application and when treating soil to move product into root zone. Product may be used as a carrier for most fertilizers both dry and liquid. When using with herbicides, fungicides or insecticide rates by 20%-30%. Multi-Care™ may be injected through fertilizer injection systems and applied with deep-root fertilizer mixes. When treating Black Layer contaminated soils, Multi-Care™ may be tank mixed and applied with most liquid fertilizers and plant protection chemicals but should be deep watered into the soil immediately following application before any drying occurs. Always irrigate soon after application of Multi-Care™ as drying will usually reduce product performance.
GRO-MAX™
Gro-Max™ is typically non-reactive but foaming may occur if mixed with acidic fertilizers or spray chemicals. They may be applied as a foliar when diluted at 1-2.5 gallons of product to 50-200 parts water or soil applied at 1 gallon of product to 10-20 gallons of water followed by irrigation.
ODORATOR
ODORATOR is a 90/10 combination of AERO and Multi-Care™ that is useful for agriculture odor and sludge control. Apply ODORATOR with a chemical feed pump directly to the wash-down water prior to barn, pen, settling ponds or lagoons. Apply 10-15 ounces per cubic yard of compost once each week to manage odors and improve compost process and reduce composting time and costs. Contact your Biofeed Representative for additional uses and other methods of application.
Ferti-Max™
Ferti-Max™ should be applied primarily as a foliar feed with a minimum dilution rate of 1 gallon of product to 10-20 gallons of water. Product may foam when mixed with acidic chemicals or fertilizers but will settle back into solution. Product may react with NON-chelated micronutrients such as Iron Sulfate, mix thoroughly to ensure solution and apply as directed.
CHETROL
CHETROL is primarily used to chelate and buffer mineral salts which accumulate in the soil profile. Dilute 1 gallon of Chetrol to a minimum of 20 gallons of water and immediately irrigate following application. Mix 1-2 quarts to 100 gallons of water to stabilize fertilizer solutions against hard water reactions. Chetrol may be used as a spray solution buffer to reduce pH in acidic solutions, consult your Biofeed Representative for additional information.
AQUAPRO
AQUA PRO is an Aquaculture pond additive and the user should follow the recommended treatment program for each application. Consult your Biofeed representative for additional treatment information.
FLOREX
FLOREX may react with NON-chelated micronutrients such as Iron sulfate, mix or stir well prior to application. Foliar application, dilute 1 2 quarts in 3-50 gallons of water and apply as directed. Consult your Biofeed Representative for the ideal program for your farming needs.
AERO, NUTREX, CO-ZYME 50, CHETROL, BIOREM and X-CELL
These should be diluted 3 gallons each to 10-50 gallons of water and are part of Biofeed's SST bioremediation programs. Consult your Biofeed Representative for additional information on environmental bioremediation programs designed to suit your needs.